Rusted Solutions Pty Ltd
Removing Rust in Brisbane

Distributors for strongarm brand, & greasemaster rust removal and rust prevention environment safe also distributors for strongarm brand, also rusteco corrosion treatments, also rusteco corrosion treatments & greasemaster. We are an australian owned and operated well sell at wholesale prices.

The Gel is simply placed over the rusted area. Simply apply the Gel to the area to be cleaned of rust and then wash off behind a couple of hours or so depending on the degree of corrosion. This is a immense option for larger items that can’t be soaked. We donate you orderly metal to permit for right surface preparation therefore a better end result as nothing is trapped between the paint and the metal. Differences are that our Soak works overnight, doesn’t stink like vomit, can be run through a re circulation system for large items you can't submerge, doesn’t seduce insects and comes as a reusable Gel too for items that you don’t want to or can’t submerge. No, the Soak is an organic product and takes time to work. This only happens when there is a barrier between the Soak and the rust for example grease, oil or the surface has been previously treated with another product. Separate any grease and oil etc then arid the surface. The Gel is a rust remover for the surface of the object and does not penetrate. Can items be submerged into the Gel? Does the Gel work on items other than metal? Are there any metals that I should not try to tidy with the Gel? If the Gel is not dismal it can be used again, the second use is slower than the beginning but it will tranquil work. The end protective coating depends on the type of item being cleaned. As per the instructions the item is to be dried and coated with a protective coating of your choice straight after being cleaned. What happens if I depart the Gel on too long? It will have removed as much rust as can be absorbed into the Gel and then dried out and set hard. It is also better at getting into and cleaning stiff areas. Make sure the surface is arid before application. Does the Effortless Tidy work on items other than metal? Light rust can be removed instantly, if this is not the case leave the Easy Clean on for 510 minutes then wash the surface with water. The last protective coating depends on the item being cleaned. If it is only light rust and sea staining that is not cleaning off there must be a barrier in the way like oil or grease etc. Make safe the surface is clean, release from other products and dry before application.