E-Zee Pool & Spa Pty Ltd
Home Cleaning in Brisbane

Relax with e-zee pool & spa swimming pool and spa experts for more than 30 years.

For superior results, the pool water pH should be 7.4 7.6 at the time of treatment. Impartial like many clarifies and flocculants, alum is more efficient in higher pH water BioLab recommends raising the pH to above 7.8 when using alum (BioGuard Water Sparkle) as a flocculant. So what are the effects on the various pool filtration systems? These ions destroy potentially adverse bacteria and limit algal growth, thereby negating the need for lofty levels of chlorine and the presence of algaecidal additives. It should be added, however, that copper ions do not buffer pH, and that the pool water will quiet require adjustment into the ideal pH range (7.4 7.6) in much the same manner as for chlorination. The manufacturer suggests testing once a week until the pool owner is. Normally, the flow through the chlorinator does not allow the accumulation of these organics in the chlorinator but in periods when the system is not in operation, the organics give in the chlorinator are exposed to lofty concentrations of chlorine and low pH. is necessary to prohibit algal growth in swimming pools. This only needs to be changed the first time the unit is used. Sunlight, in combination with a stretched liner, causes various chemical reactions to occur which create a brown stain. This will thwart water discoloration and the staining of pool surfaces. Whilst the water is clearing, adjust the pH and balance the water. Yes: Stain is maximum probably due to algae. You should investigate why the levels of cyan uric acid are so lofty by asking questions regarding the amount of chlorine being added, the time of filtration, the frequency of back washing, etc. BioGuard Knowing Sticks and Salt Pool Sticks are a chlorine compound which effectively kill and oversee bacteria and other microorganisms in swimming pool water. Salt Pool Sticks are ideal in salt pools as a chlorine boost when bather load is high. As algae and bacteria are being killed, the filtration enhancer and clarified aggregates particulate matter, including dead algae and bacteria. Another key ingredient, cyan uric acid, protects chlorine in the pool water from the degrading effects of sunlight. It is especially important to ensure that there are no metals in the spa water. optimizer Plus should not be added if the pH is outside the acceptable range of 7.4 7.6. Pool salt, corroding heat exchanges or pool equipment) behind treatment with backup II or Salt Pool Protector, then additional polyacrylate offer in the formulation will effectively bind with those metals and prevent them from staining pool surfaces. The pool will turn cloudy brown upon chlorination this indicates that manganese has become insoluble and filterable. Once the majority of manganese is removed, the necessary addition of insignificant amount of pack water should be added through a skimmer with chlorine tablets or sticks present. No matter what the algaecide used, if organic waste material is give in the pool, algae will be provided with nutrients vital to growth.